| Weight | 0.029 kg |
|---|---|
| Number of lines: | 100 lines |
| Outer diameter: | 22mm |
| Bore Diameter: | 3.5mm |
| Thickness: | 0.3mm |
| Material: | Steel |
| Production process: | Laser Cutting |
| Supply voltage: | 5V |
| Wiring: | Red-5V Black-GND |
| Output Signal: | 5Vp-p two quadrature signal output |
Code disk Technical parameters:
Brand new and high quality.
Output Signal: 5Vp-p two quadrature signal output
Important note:For a long time to hold backorDo not block allNo output, as the phase detection, only in the correlation of the rising and falling output waveform, so turn the encoder or switch back and forth with opaque object state when the square wave output, high speed condition, similar to sine wave and sawtooth wave, as shown in the video demonstration below.Multimeter test have been about 0.1 V, it is useless!Test, please useThe oscilloscopeorSinglechip collection.
